November 15, 2026
Release notes for November 15, 2026.
This release grades Public Safety coverage on grids you draw and edit, lets you set your own MCS and spectral efficiency tables, counts macro signal as interference in every heatmap, and makes doors and windows move with their walls.
New
Design
Public Safety Compliance Grids
Grade a building on the grid the authority will walk. On the Public Safety panel's Compliance tab, Add default grids gives every floor without a grid its default one, or draw your own from Compliance grids in the Areas panel and move, rotate, or stretch it like any area. Click a cell to leave it out of grading. After a run, every cell shows the downlink level it reached or the KPI it failed, and clustered dead zones are labelled. A single Compliance check picker (design check, baseline, acceptance test, or annual re-test) replaces the separate kind and purpose fields, and measured checks no longer need a design on the floor. In the report, each cell prints its result and number, and pages graded on a prediction are marked Predicted. Learn more
Door and Window Editing
Doors and windows now move with their wall: drag the whole wall and they come along, or drag one end and they keep their distance from the end that stayed. Drag a door or window along its wall, or drop it onto another wall to move it there. With the door or window tool, click to place one at the type's width, or press and drag along a wall to draw one at any width. In open space, draw it like a wall, with the same snapping: eino creates a wall to hold it. Learn more
Simulation & Heatmaps
Your Own MCS and Spectral Efficiency Tables
Simulate throughput the way your radio vendor specifies it. Click MCS Mappings on an access point or remote unit configuration to open its table: work in CQI or MCS with the 3GPP columns alongside, edit the SINR thresholds and efficiency curves, and import a sheet (CSV, XLSX, or JSON) from the vendor's data. Throughput heatmaps use the table you save. Learn more
Macro Signal as Interference
In the Macro Dominance panel, switch on Apply as interference to heatmap KPIs and the macro levels you entered count as interference in every heatmap KPI, not just the Dominance map, so SINR and throughput show what the macro network does to your design. Learn more
Improved
Projects
- Sharper large floor plans: vector PDF and CAD backgrounds are rasterised at a resolution set by the drawing, not the paper, so large sites stay crisp.
- Multi-unit projects (where enabled): choose and preview the pages right after the upload, before the project is created, and enter 0 units for a floor that has none.
Design
- Snap to walls: on an access point configuration's Unit tab, Snap to walls moves every AP of that configuration onto its nearest wall.
- Optimize Network with AI for DAS: antenna swaps now work on DAS builds, replacing every placed antenna of a configuration, and lifecycle cost reads in dollars with an energy and labour-plus-hardware breakdown.
- Cable loss: cable labels include a run's fixed loss, and warn when a run is longer than the longest piece of that cable you can buy.
- Multi-floor 3D: ghosted floors keep their floor plan lines crisp and fade smoothly with the Multifloor slider.
- Live collaboration: cable tray and area edits appear for everyone with the project open.
- Wi-Fi bands: the heatmap band list shows switched-off Wi-Fi bands, greyed out.
- Public Safety runs: a design check offers every band a Public Safety head end carries anywhere in the project, so a floor fed from another floor can be graded, and options that can't be used say why.
- DAS guidance: guided JMA TEKO head ends feed every operator onto one optic, and Place With AI only cables a remote unit to ports that carry what it radiates.
Simulation & Heatmaps
- Coverage tab: the summary shows the mean of the displayed KPI, and Download CSV exports the area at each level, ready to chart.
AI
- Links to objects in chat: objects the assistant names are links; click one to zoom to it on the plan.
- The assistant shows you where: when the assistant finds a location, the view moves there, and a Show … in layout button takes you back to it later.
- Focus across floors: focusing an object on another floor, from the AP table or the donor card, lands on the object instead of the floor's centre.
Plus other fixes and improvements across the platform.
